£1,448.06 – £4,981.82
Take a further 10% off using discount code LOWARA10 in checkout.
HYDROVAR is an intelligent controller that matches pump performance to demand.
It controls the speed of a standard IEC motor by converting the fixed voltage and frequency from the power supply line.
It can be fitted easily to any new pump system or retrofitted to existing pumps using the fast and easy “clip and play” mounting clamps.
Pump systems are very often oversized for the application and therefore using much more energy than needed. With energy savings of up to 70% at partial loads alone, the typical investment payback period is less than 2 years, depending on energy costs and pump operating times.
A motor running at 80% of its maximum speed uses 48% less energy and slashes carbon emissions.
Energy is the largest cost of running any pump, with the biggest potential savings. HYDROVAR works with your system to make it efficient. This intelligent variable speed drive controls the pump exactly according to the current requirements of the user. Compared to an unregulated system, HYDROVAR saves up to 70% of the energy consumption (as tested by TÜV Austria, vogw0312-PIR-ZR). The smooth regulation at optimal operation increases not only the efficiency but also the life of the system’s components and reduces maintenance costs.
The controls available include constant pressure, system curve, constant flow or via an external signal. In addition to these functions HYDROVAR can do things that are normally only performed by the most advanced computerized control systems such as: stopping the pump or pumps at zero demand; stopping the pump or pumps in case of water failure; allowing protection against dry running; a standard feature of a 2nd required input value that allows change over between two different pressure settings via an external switch; sensor failure and over temperature of inverter and motor which protects the pump and motor from under or overvoltage.
Other features include: automatic test starts; auto cyclic change of lead and lag pump units; a memory for any inverter fault signals; an operating hours run counter; two levels of password protection if required.
HVL2.015-A0010 – 0.55-1.5kw – 1ph/3ph, HVL2.022-A0010 – 2.2kw – 1ph/3ph, HVL2.030-A0010 – 3kw – 1ph/3ph, HVL2.040-A0010 – 4kw – 1ph/3ph, HVL4.015-A0010 – 0.55-1.5kw – 3ph/3ph, HVL4.022-A0010 – 2.2kw – 3ph/3ph, HVL4.030-A0010 – 3kw – 3ph/3ph, HVL4.040-A0010 – 4kw – 3ph/3ph, HVL4.055-A0010 – 5.5kw – 3ph/3ph, HVL4.075-A0010 – 7.5kw – 3ph/3ph, HVL4.110-A0010 – 11kw – 3ph/3ph, HVL4.150-A0010 – 15kw – 3ph/3ph, HVL4.185-A0010 – 18.5kw – 3ph/3ph, HVL4.220-A0010 – 22kw – 3ph/3ph