Grinder FX is a submersible pump with shredder designed for the drainage of waste water coming from drains in civil and commercial environments. The pump is certified according to the wastewater standard EN 12050-1.
Pump suitable for fixed installations with a coupling device or mobile if placed on a base directly on the bottom of the tank. Thanks to the high-strength grinder, the pump is suitable for installations with small-diameter pipes or those requiring high pressures.
The pump is designed for quick maintenance thanks to a constructive solution that provides easy access to the main components of the pump. Automatic versions with power up to 1,5 kW. ATEX version available for use in potentially explosive environments. (ATEX certifications: II2G Ex db k IIB T4 or IEC EX: Ex db IIB T4 Gb).
MA = Single Phase (M) Automatic (A)
MNA = Single Phase (M) Non-Automatic (NA)
TNA = Three Phase (T) Non-Automatic (NA)
Flow rate minimum and maximum: 23,8 m3/h
Head up to: 33 m
Immersion dept (maximum): 20 m
Type of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste
Supported liquid temperature (maximum and minimum): + 50°C (+ 60°C for a short period of time)
Flanged and threated: from 1″½, DN32, DN40
Impeller type: Grinder
Start time (maximum) per hour: 20/h
Class of protection: IP 68
Motor insulation class: F
Single phase power input: 1x 220-240V 50Hz
Three phase power input: 3x 400V 50Hz / 3x 230V 50Hz only on request
Maximum dry run time: 10 min
Power cable (m) and plug: 10 m
Possible type of installation: mobile when on the ground, fixed with coupling device
Certification: EN 12050-1 \ ATEX
Special versions on request: different cable lengths, different voltages and frequencies
GRINDER FX 15.07 MA, GRINDER FX 15.07 MNA, GRINDER FX 15.07 TNA, GRINDER FX 15.11 MA, GRINDER FX 15.11 MNA, GRINDER FX 15.11 MNA, GRINDER FX 15.11 TNA, GRINDER FX 15.11 TNA, GRINDER FX 15.15 MA, GRINDER FX 15.15 MNA, GRINDER FX 15.15 TNA, GRINDER FX 15.22 TNA